FANUC M-710i

FANUC M-710i Overview

The FANUC M-710i robot is designed for machine loading, material handling, and material removal applications. The 710i is part of the FANUC M Series robots. This robot has been used in production for over two decades. This used material handling robot is the predecessor of the FANUC M-710ib/45. The M710i has a smaller work envelope than the S-430iw. The FANUC M710 is a six axis robot with servo driven motors. The FANUC M 710i is available in the FANUC R-J3 and FANUC R-J2 controllers. With the capability to perform MIG and TIG welding the M-710i is a viable choice for most welding applications with the additional of welding software. Purchasing a used FANUC robot such as the M-710i can significantly increase productivity at a relatively low cost.
Looking to sell a robot like this? Click Here: Sell a robot
Looking for a the newer version of this robot?


Axes 6
Payload: 45 KG (99.20 lbs)
Reach: 1706 MM (67.16 in)
Repeatability: ±0.15mm (.0059 in)
Robot Mass: 530 KG (1,168 lbs)
Structure: Articulated
Robot Motion Speed
J1 160 °/s (2.79 rad/s)
J2 120 °/s (2.09 rad/s)
J3 150 °/s (2.61 rad/s)
J4 240 °/s (4.18 rad/s)
J5 240 °/s (4.18 rad/s)
J6 340 °/s (6.45 rad/s)
Robot Motion Range
J1 - 360°
J2 - 260°
J3 - 420°
J4 - 540°
J5 - 250°
J6 - 720°

Partial parts list for the FANUC M-710i. Note that the parts vary based on the controller.
Click on the part number for more information.
Part Name Part Number

Resources and Information